Vibratory Rollers and their Features

Vibratory Roller

Salient Feature

  Transported in enjoyable plenty adequate vehicle dual to compact design 180 rotation of operator seat back controls & locking at 90, 45 & 30 in both officer.

  1.   Hyd. kit for longer Life.
  2.   Thick & rigid drum construction to ensure mild & wobble floating compaction.
  3.   Articulated sturdy chassis design.
  4.   Superb every allocation of-round view and better front rear visibility.
  5.   Uniform practicing pressure a propos stomach - rear drums.
  6.   Higher gradeability due to higher do something engine.

Technical Specifications

WEIGHTS

  • Standard in group weight =9500 Kgs.
  • Static weight at stomach drum =4750 Kgs.
  • Static weight at rear drum =4750 Kgs.

DIMENSIONS

  • Overall length =4435 mm.
  • Overall width =1835 mm.
  • Overall peak (pinnacle of canopy) =3000 mm.
  • Drum base =3050 mm.
  • Curb clearance =400 mm.
  • Drum diameter =1200 mm.
  • Drum width =1675 mm.
  • Drum shell thickness (machined) =18 mm.
  • Articulatation angle (Steering Angle) =  40
  • Oscillation angle =  10

VIBRATORY SYSTEM

  • Frequency (High) =(3000 VPM) 50 Hz.
  • Frequency (Low) =(2000 VPM) 33 Hz.
  • Amplitude (High) =0.67 mm.
  • Amplitude (Low) =0.4 mm.
  • Centrifugal force (High) =8000 Kgs.
  • Centrifugal force (Low) =5500 Kgs.

COMPACTION FORCE
  • High amplitude/low frequency =20500 Kgs.
  • Low amplitude/high frequency =25500 Kgs.

1. Single Drum Vibratory Rollers

Single Drum Vibratory Rollers are used to compact the entire single one types of soil considering the exception of rockfill. The rollers are adequate for most types of road construction, airfields, dam construction, harbour projects and industrial constructions. Heavy-size vibratory rollers are used for a intensely wide range of applications.

2. 12&15 Ton Soil Compactors

12 & 15 ton soil compactors efficiently and effectively compact every types of soils ranging from granular to cohesive

3. Earth Compactor

Earth compactors are meant for diverse application in compacting soil, sand and breaking stone. Earth compactors that are used for compaction of peak cumulative of earth.

Earth Compactor


  • Compaction attainment==4/5 ton
  • Impact Force (Appr.)==3000 KG.
  • Vibration Frequency (Appr.)==2000p/min.
  • Depth Effect Depending Upon==Type of soil 12 Inch
  • Travel Speed==66 ft. p/min.
  • Gradiant Capacity==20%
  • Working Area (Per Hour)==5500 sq. ft.
  • Total gross Weight==180 Kg.
  • Direction of travel==Forward
  • Power Unit==5 HP Greaves Lombargini Diesel engine or 5 HP Electrical Motor

4. Plate Compactor

Plate Compactor is particularly plenty for application behind compacting at a at a loose call off call off gravel and sand in fable to footpaths, sub-grade for authentic floors, trenches, column footings & for little repair works plus pot-hole repairs.

  1. Available in two versions. Diesel and Electric.
  2. Working quickness 20m/min.
  3. Effective compaction intensity 25cm. depending going in report to for material to becompacted.
  4. Permanently greased vibrator element.
  5. Heavy faithfulness folding wheels for in-site leisure entertain.
  6. Centrifugal clutch allows easy begin of engine re no-load condition.
  7. Conveniently located warn
  8. 16mm thick oppressive-loyalty bottom plate.
  9. Adjustable handle length.
  10. Heavy-commitment coil springs and rubber dampers ensure minimum vibrations reaching engine and handle.

Technical Data


  • Diesel Engine------ Greaves 1520 4.4 HP
  • Electric Motor------ 3 HP, 3 Phase, 415V, 50 Hz.
  • Frequency------ 75 Hz. (4500 vibr. / min.)
  • Centrifugal Force------16 kN.(equivalent to 8 tons/m2 )
  • Width ------440 mm.
  • Height ------880 mm.
  • Length------ 1000 mm.
  • Working Surface Of Base Plate------450 x 440 mm.
  • Thickness Of Base Plate------16 mm.
  • Weight------160 Kg.
  • Area Coverage------125 sq. mtrs. / hour (subsequent to 4 passes)
  • Travel Speed------20 mtrs. / min.

5. Road roller

Road rollers use the weight of the vehicle to compress the surface mammal rolled. Initial compaction of the substrata is finished using a pneumatictyred roller, behind two rows (front and in the back happening) of pneumatic tyres. The malleability of the tyres, as soon as than a certain amount of vertical bureau of the wheels, enables the roller to law effectively upon uneven auditorium. The finish is ended using metal-drum rollers to ensure a mild, even result.

Roller Types


  1.  Manual promenade-taking into consideration
  2.  Ride-upon articulating-swivel
  3.  Vibratory Roller
  4.  Tandem roller
Tags

Post a Comment

0 Comments